Concord

ARM - Press 3 and then enter code

DISARM - Press 1 then enter your code

CHECK STATUS - Press the * button

RESET - Press 1 then enter code

 

To start a phone test, press 8, then enter code, press 3 to begin phone test and then 1 to finish phone test

 

To put panel in walk test, press 8 then enter code, press 3 the keypad will display sensor test

 

To power down the panel, unplug transformer, then undo the battery leads

 

 

Vista 20P-

To disarm your panel enter your code then press 1

To arm panel enter your code then press 2

To check status of panel press *

To reset, enter code then press 1 then repeat

 

For phone test and walk test, enter code then press 5, panel will then enter walk or dial screen select walk for walk test and dial for phone test

 

To power down the panel, unplug transformer, then undo the battery leads

 

 

Bosch-

To disarm your panel simply enter your code

To arm your system press the all button on the keypad then enter code

To check status use the up and down arrows on the keypad to navigate the zone in trouble

To reset, press silence then reset

To start a walk test, hit the menu button, then select actions, in actions select option 3 for walk test

 

For a phone test, place system on test and disconnect the battery in the panel, check rapid and see if the signal came in

 

 

IQ Panels-

To disarm your system enter in your code when prompted on the home screen of panel

To arm your system press the green button on the home screen and select arm stay or arm away and it will then begin counting down till activated

For the status of the device on your system they should be displayed on the home screen of your panel indicating the issue

To reset panel, enter your code

 

For all other testing necessities, click the gray tab at the top of the screen, from there click advanced settings, enter installer code, then click system tests